Production line production capacity 40-50 m³/h automatic red brick
forming machine
The wheel mill is my company in absorbing foreign advanced
experience of similar products on the basis of the development of
new products, is in the lead in the domestic similar products. The
machine has reasonable structure, stable operation, low fault rate,
convenient in operation and maintenance. Is mainly used in the coal
gangue, shale, clay, sludge and fly ash as main raw material of the
raw material in the process of sintered brick production. With
crushing, grinding, kneading, mixing, etc. After the raw materials
are ground by the machine, the comprehensive technological
performance of raw materials can be improved significantly, and
high quality sintered products can be produced.
The motor provides the driving force and drives the hydraulic
coupling to realize the stable starting of the motor without load.
The power is transmitted to the reducer through a pulley, and the
reducer drives the spindle through a coupling. The spindle and the
suspension seat are connected by the expansion sleeve, and the
torque transfer is realized by the friction between the expansion
sleeve, the spindle and the suspension seat. The advantage is easy
to install and disassemble, can realize the overload protection of
the spindle, avoid damage to the spindle machining surface. The
suspension seat transmits power to the inner and outer cantilevers
respectively, and drives the two rollers to rotate around the main
shaft, and the rollers rotate around their respective rollers at
the same time. The material mixed with water in the former process
falls from the central hopper at the top of the equipment to the
front of the inner roller. After the material is rolled and crushed
by the inner roller, it is scraped to the outer roller raceway by
the floating scraper and passes through the outer roller. After the
raw materials are rolled, the grinding and extrusion are carried
out through the holes of the sieve plate to complete the crushing,
mixing, grinding and kneading of various raw materials.
Key Parts
Sieve plate
Raw material for the sieve plate is high manganese steel, module
designing, anti-wearing and also can be removed with new spare
easily.
Mill
The roller adopts a structure that the roller skin is separated
from the hub, which is connected as a whole by a wedge-shape key;
it is convenient to replace the skin when needs.
Roller skin
Thickness of the roller skin is 150 mm, made of
high-manganese-chromium alloy steel, which is high-strength and
wear-resistance
Pan
It is the lattice structure which welded by steel wool, which is
stronger and could bear huge impact compaction.
Structure support
There is polyurethane shock-absorbing pad between the platform and
reducer, which is used to absorb the impact force and vibration of
the equipment during operation.
Note: Structure supporting and maintenance platform are optional
and
customers can weld in the local.
Main shaft
The main shaft is made of alloy steel forgings, and has been heat
treated, which has high strength;
Fatigue resistance and can bear large radial eccentric forces.
Motor&reducer
A torque-limited and hydraulic coupling is used for power
transmission between the main engine motor and the input shaft of
the reducer, which effectively protect the reducer and the motor
from the impact on the mechanical parts when working at full load;
the main reducer is equipped with a forced lubrication system and
cooling fan.
Structures of Pan Mills Supplier and Manufactures for Wet Materials
Processing Grinding
The rolling mechanism is simple to build, easy to maintain, not
strict with feeding size requirements, equipment self-weight,
strong overall rigidity, impact resistance, and safe and stable
equipment operation.
The hydraulic coupling is used to realize the power transmission
between the motor and the reducer, the starting impact is small,
and the reducer can provide overload protection and prolong the
service life.
The inspection door open/close detection switch is interlocked with
the main motor start/stop switch to ensure that the maintenance
personnel can maintain the machine when the machine is stopped.
Technical Parameters
| No. | Item | TWPM185 | TWPM200 |
| 1 | Roller size | 1850*700mm diameter*width | 2000*900mm diameter*width |
| 2 | Rotate speed for main shaft | ≥13 rpm | ≥13 rpm |
| 3 | Power | 90+2.2+2.2+1.5kw | 142kw |
| 4 | Effective diameter of rollers | 1850mm | 2000mm |
| 5 | Rotating speed | ≥29rpm | ≥29rpm |
| 6 | Diameter for screen hole | Customized building | Customized building |
| 7 | Production capacity | 40-50 m³/h | 60-90 m³/h |
| 8 | Total weight of equipment | 65200 kg | 70000 kg |
| 9 | Dimensions | 5300*4600*6500mm | 6700*6500*6700mm |
Our service
Welcome to contact with BBT
BBT supply following machinery and project :
1. Full automatic clay brick making machinery ( belt conveyor , box
feeder, roller crusher , fine grinder. double shaft mixer , wet pan
mill ,brick cutter, brick extruder ,spare parts ...)
2. Brick drying system( small brick drying room, single layer brick
dryer chamber , tunnel dryer, fast rapid dryer chamber )
3. Brick kiln project ( hoffman kiln, tunnel kiln )
4. Automatic brick making system ( brick setting/stacking machine,
red bricks unloading machine, brick packaging machine ...)
5. Kiln firing system ( coal / gas /oil combustion system ,control
system )
6. Whole brick making project design and construction .
